Grace Tan-Wang is a Principal Systems Engineer at NASA/JPL, spending first half of her 30+ years in the development of spacecraft and the second half in mission operations. She has worked primarily on in-house flight projects such as Cassini, Spirit and Opportunity, Curiosity, Perseverance, and now on Mars Sample Return. She is works on technology advancements such as the Low Density Supersonic Decelerator project and now is co-leading the Europa Lander’s Autonomy task. Grace has a BS in Aeronautics and Astronautics from MIT and a MS in Aerospace Engineering from USC.
Unit Head, Biomechanical Development and Applied Computational Engineering
Amy Alexander is Unit Head of the Biomechanical Development and Applied Computational Engineering units within Mayo Clinic’s Division of Engineering (DOE). In this role, she bridges the additive manufacturing capabilities of the DOE with the clinical practice. Amy chairs the Society of Manufacturing Engineering (SME) Medical Additive Manufacturing Advisory Group, and is a member of the American Society of Mechanical Engineering’s (ASME) Medical AM Advisor Committee and a member of the Radiological Society of North America’s 3D Printing in Medicine Special Interest Group (RSNA 3D SIG). Amy is a frequent co-author of medical 3D printing peer-reviewed papers, and long-term reviewer for Springer’s 3D Printing in Medicine Journal. Amy holds a Bachelor of Science in Biomedical Engineering and a Master of Science in Engineering Management from the Milwaukee School of Engineering (MSOE). She holds certificates in Additive Manufacturing from MIT and SME. Photo credit: Mayo Clinic Photography.
Unit Head, Biomechanical Development and Applied Computational Engineering
Dr. Christian Coachman graduated in Dental Technology in 1995 and in Dentistry at the University of São Paulo/Brazil in 2002. He is the president of the Brazilian Society of Esthetic Dentistry and a member of the European and American Academies of Esthetic Dentistry, becoming the only dentist member of 3 of the most important esthetic dentistry academies in the world. In 2004, Dr. Coachman was invited by Drs. Goldstein, Garber, and Salama, to join Team Atlanta as the Head Ceramist of their laboratory – a position he held for 5 years. He has worked with some of the world’s most renowned dentists. He is the developer of well known, worldwide concepts such as Digital Smile Design, Pink Hybrid Implant Restoration, Digital Planning Center, Emotional Dentistry, Interdisciplinary Treatment Simulation and Digital Smile Donator. He is the founder and CEO of the DSD-Digital Smile Design company and the Director of the DSD Residency program, providing continuing education courses for dental professionals all over the world. In 2017, he became an adjunct professor of the Restorative Department at University of Pennsylvania School of Dental Medicine and, in 2018, coordinator of the Digital Dentistry Post Grad Program at University UniAvan in Balneário Camboriú, SC, Brazil.
Jaco is an award winning artist that has been in the film and entertainment industry for more than 20 years and has worked on over 90 feature films and productions. He has acquired many skills by always exploring different aspects of his art form and keeping up with new technologies as well as materials. His passion is to be involved in the creative processes from inception through to final application. He incorporates digital technology into his workflows as much as possible by combining digital sculpting, 3D scanning, 3D printing and CNC milling with his traditional art skills.
Ya’ara Keydar, MA, is a fashion historian and curator. She is currently a doctoral student in the Cultural Studies PhD program at the Hebrew University. Keydar graduated from the Costume Studies MA program at NYU, and received NYU Steinhardt School’s Samuel Eshborn Award in 2016. She holds a bachelor’s degree with honors in fashion design from Shenkar College. Keydar curated the exhibitions "The Ball: Taylor-Made Escapism" (2021) and "Je t’aime, Ronit Elkabetz,"(2018) at Design Museum Holon. She also curated "NY Fashion Rediscovered," at ZAZ10TS Gallery in New York in 2020, and her previous exhibition, "A Walk of Art: Visionary Shoes," was shown at the Parasol gallery in New York in 2017, and subsequently traveled to San Francisco. She has interned at both the Metropolitan Museum of Art’s Costume Institute and the Museum at FIT.
Jan Wolff graduated in 1995. He then pursued a specialisation in Oral Surgery and at a later stage Maxillofacial Surgery. After specialising he worked in Sweden, Germany, Finland, The Netherlands and Denmark. He received a PhD degree in medicine from the Vrije University Amsterdam. Furthermore, he was awarded the academic title of Adjunct Professor in Oral and Maxillofacial Surgery from the University of Tampere, Finland, and the title of Privatdozent in Oral Surgery from the University of Hamburg. He recently worked part-time at the Fraunhofer Research Institution for Additive Manufacturing Technologies IAPT in Hamburg, Germany. Currently Jan Wolff is Professor and Chair of the Section of Oral Maxillofacial Surgery and Oral Pathology at the University of Aarhus in Denmark.
Max Lobovsky is co-founder and CEO of Formlabs. Formlabs pioneered the new category of professional desktop 3D printing when it launched the world’s first affordable, powerful desktop stereolithography 3D printer. Prior to starting Formlabs, Lobovsky led the efforts at Fab@Home, one of the industry’s earliest open-source 3D printing projects which has been instrumental in setting up labs in schools worldwide. A Forbes’ 30 Under 30 recipient and World Economic Forum Pioneer, Lobovsky holds a B.S. in Applied Engineering and Physics from Cornell University and a M.S. in Media Arts and Sciences from MIT.
Dylan Horvath is an engineer, industrial designer and entrepreneur who explores how to use design to improve human experiences. He is the CEO and founder of Cortex Design, an award-winning product design firm based in Toronto. Dylan and his team design medical devices and consumer products that foster human connection, improve health outcomes, and allow people to do things that they couldn’t before -- everything from wearable devices to portable 3D printers to musical instruments. Cortex won the Bold Epic Innovator XPrize for the VITALITI Tricorder, a cloud-based wearable medical device that can diagnose 19 medical conditions and monitor all 5 vital signs. Their work has been featured in Popular Science, Huffington Post, The Globe and Mail, Forbes, and Canadian Business’s Fastest Growing Companies.
Dr. Summer Decker is the Director of 3D Clinical Applications and Vice Chair of Research and Innovation at the University of South Florida Morsani College of Medicine and Tampa General Hospital. Her team does medical modeling and printing for hospitals across the Tampa Bay area and the US. They hold multiple patents for medical devices developed in their lab using 3D printing. In conjunction with their colleagues at Northwell Health, the USF Health 3D team developed the 3D printed nasopharyngeal swab for COVID diagnostic testing in 2020. Working with FormLabs for distribution, there are more than 70 million of the USF Health designed swab in nearly 60 countries.
From supporting rights for student-athletes vs the NCAA, to challenging the status quo within Urban Mobility in a land built for cars, Peters' goal is to change the world for the better in his own unique ways. He's a recent Kettering University graduate who founded KUHMUTE, together with fellow KU grad Scott Spitler, in 2018 during the early rise of Micromobility. This was mostly due to the new form of dockless escooters that roamed the world, and caused havoc for cities. Together, Peter and Scott, understood there should be an EV charging network experience, but agnostic to any form factor of Micromobility -- for both shared and owned. KUHMUTE is a world-class locking & charging manufacturer that supports mobility services all over North America, fulfilling the need as the only Universal Charging Network for anything smaller than a car.
Christina is the Cofounder & CEO of Makelab, delivering 3D printing solutions to teams, on a mission to empower creation, and democratize 3D printing. By streamlining the innovation process for businesses, we make 3D as simple as 2D. Christina and her Cofounder, Manny, both have extensive industrial design backgrounds and were top customers of a 3D printing service in the past. Christina is also on the Board of Directors for the global nonprofit, Women in 3D Printing, where she works with other Board Members to foster a diverse industry and expand the global reach of the organization through a supportive and connected network.
C. Mei-An Tsu holds a M.S. in Objects Conservator from the Winterthur Museum/University of Delaware Program in Art Conservation. Currently, she is an objects conservator at the Museum of Fine Arts, Boston where she is responsible for conserving large-scale stone sculpture for installation in newly renovated galleries dedicated to Greek, Roman and Byzantine Art. Her research interests include the use of emerging technologies to promote the preservation of cultural heritage, as well as to enhance the visitor experience and accessibility to collections.
Matt is the Founder and CEO of Partial Hand Solutions and inventor of the M-Finger, M-Thumb, Partial M-Finger, Titan Series heavy duty locking fingers and the Hold-It device. He is a graduate of Springfield College with a degree in Health and Fitness and a Certified and Licensed Prosthetist. He is also a National Upper Limb Prosthetic Specialist with Hanger Clinic. Matt is an adjunct professor at the University of Hartford and has lectured and consulted internationally. He has also written several published articles and book chapters.
Yurdanur Ucar graduated from Ankara University, Faculty of Dentistry where she received her DDS degree. She has a PhD in Prosthodontics received from Cukurova University. She holds MS-degree in Dental Materials and PhD-degree in Oral Biology both received from The Ohio State University, USA. She was a Full-Professor in the Department of Prosthodontics, Faculty of Dentistry at Cukurova University where she served as Department Head of Prosthodontics and Vice Dean for Educational Affairs. She was as an adjunct-faculty in Department of Biotechnology. She also served as Department Head of Advanced Materials and Nanotechnology. Dr. Ucar’s research focus includes dental-materials, dental-implantology, biomaterials, additive manufacturing of metal powders, ceramic and polymers including layered-manufacturing applications of bone tissue engineering. She is founder and CEO of a start-up company called BioFuture founded to make customized hard tissue using stem cells and 3D-bioprinters. She currently works in a private dental clinic in Antalya.
Bioengineer who obtained his degree at the University of Pavia, Italy with a huge interest in additive manufacturing and the use of 3D modeling in order to support surgical training. He manages the production line and the activity of training using the UpSurgeOn's technologies. Marco started working in the field of neurosurgery and now he is involved in R&D processes to enter in other disciplines thanks also to his presence in the operating room.
Sarah Boisvert is a pioneer in digital manufacturing, lasers, 3D Printing and workforce training. She co-founded Potomac Photonics that invented and manufactured the laser for LASIK surgery and laser machine tools for micro-manufacturing. After the sale of Potomac, she consulted for the MIT Fab Lab Network She founded Fab Lab Hub, LLC in Santa Fe, NM in 2017 to develop workforce training programs and in 2021 created the New Collar Innovation Center a private-public partnership to spur creative problem-solving, especially for education. In collaboration with America Makes, she developed a digital badge micro-certification program for 3D Printing technicians. Fab Lab Hub was also granted an additive manufacturing registered apprenticeship by the US Dept. of Labor in 2020. Sarah is a Fellow and Past President of the Laser Institute of America, an Ambassador of America Makes, and founded the New Mexico chapter of Women in 3D Printing.
Dmitry Vasilev is a co-founder and CBDO of "Karfidov Lab" LLC and "Komarik" LLC. He graduated NUST MISiS in Moscow and then received master's degree in a joint program of the Skolkovo Institute of Science and Technology and MIT. In 2014 Dmitry worked at the laboratory of advanced manufacturing technologies at the University of South Carolina. His research was done under guidance of Professor Zafer Gurdal and Professor Psakhie S.G. in the field of FDM-like manufacturing process to produce composite parts with anisotropic properties. Dmitry along with his partner Alexey are among the first donors of the Skolkovo Institute of Science and Technology. Since 2014, he is co-owner of the engineering company Karfidov Lab. After 7 years the company has become the market leader in industrial design and high-tech design of innovative devices and products with a turnover of more than 2 mln USD. He co-founded several spin-off companies, attracted VC round to a medical equipment project.
Dmitry is an expert in Product Design and Development, end-to-end design, development management and manufacturing technology.
Doctor of Medical sciences (PhD) , Professor of Prosthodontics Dentistry
South Ural State Medical University
From 2003 to the present, I have been working as a dentist orthopedist in a dental clinic. (private practice)
In 2006, the dissertation was defended for the degree of candidate of medical sciences
in 2012, the dissertation for the degree of Doctor of Medical Sciences was defended.
In 2016 awarded the title of Associate Professor of Higher Attestation Commission
in 2018 received the highest medical category
more than 80 publications, including in international citation databases 2 Ph.D. under my supervision I am fluent in all methods of orthopedic and therapeutic dental treatment, including complex, maxillofacial prosthetics, aesthetic treatment and prosthetics, whitening, implant prosthetics, removable prosthetics. I work with a microscope and magnification. I own all the techniques of digital dentistry. I understand the analysis of CBCT and other X-ray studies of the head and neck. I work in the field of oncology, experience in the management and rehabilitation of patients after cancer treatment in the head and neck.
Doctor of Medical sciences (PhD) , Professor of Prosthodontics Dentistry
Paul is Pixologic’s in-house ZBrush expert. He is responsible for developing and enhancing the digital sculpting pipelines at multiple area studios, working with artists ranging from feature animators to toy designers. As part of the Pixologic team, Paul travels to various studios and schools, giving live demos and offering educational and artistic support.
I was born in 1984 in Buenos Aires, Argentina. I'm a CG Artist and Digital Sculptor and I´ve been working in different areas of the field for more than fifteen years. My first job connected with the 3D world was in engineering as a Mechanical Designer. Later on, I moved to Architectural Visualization as a Technical Director. This was followed by Video Games, where I worked as a Lead Animator. Then I entered the Advertising and Motion Graphics business as a CG artist and Art Director. And for the last 5 years, I´ve been working as a digital sculptor for some of the best collectible companies in the world, like Sideshow Collectibles. There, I perform the role of Senior Sculptor and Art Director, giving life to many DC and Marvel characters, from the comics to the statue collectible world.
Conrad J Rensburg is CEO and head of the dental implant division at Absolute Dental Lab in the Triangle region of North Carolina. He graduated under full scholarship with a 4-year Baccalaureate degree from Pretoria Tech in 1992. He is certified with an ND in technology and specialized with an NHD in fixed prosthetics. He is a member of the prestigious PEERS association, the Academy of Osseointegration, the American College of Prosthodontists and registered with the NADL, NCDLA and certified by the SADTC. He has specialized in fixed dental prosthetics with an emphasis on dental implants since the early 90’s. As a CE-accredited speaker since 2002, he has presented at hundreds of events across the USA, including the Academy of Osseointegration, Global and US symposiums, World Summit Tours, and a multitude of smaller study club events. Conrad’s emphasis as a speaker, is keeping todays clinicians abreast with the latest advancements in restorative protocols and digital workflows related to removable as well as fixed prosthetics. His courses also cover guided surgery and latched conversion techniques, screw retained restorative options, digital denture workflows as well as hybrid implant retained and supported solutions. As author of multiple published articles, his focus is on CAD implant design protocols and fixed as well as removable hybrid implant supported techniques. Conrad can be contacted at absolutedentallab.com or firstname.lastname@example.org
Lindsey is the CEO at SNL Creative, Inc. A creative design and manufacturing company in Los Angeles. With 10+ years in Additive Manufacturing experience and certification from MIT Professional school of Business in Innovative Product Design for Additive Manufacturing. Lindsey is a client focused business leader with a growth mindset. She maintains an unwavering commitment to build trusted partnerships with her clients that exceed expectations. Lindsey serves as the LA Ambassador for Women in 3D Printing, a non profit with a mission to close the gender-gap in the Additive Manufacturing Industry. She is an executive planning committee member for the annual TIPE conference, an international all-women speaker conference for the 3D Printing Industry.
Tapestry, Inc. (Coach, Kate Spade, Stuart Weitzman)
Tomer Emmar is a Prototyping Manager on the Digital Product Creation team at Tapestry, a New York City-based house of modern luxury fashion brands including Coach, Kate Spade, and Stuart Weitzman. He is currently leading a team of experts deploying 3D printing technologies to create early alignment between designers, product developers, and manufacturers across the globe. Tomer's team is responsible for covering all product categories from sub-components such as hardware and jewelry to full-size footwear and handbag samples. He is also a self-taught metalsmith and the founder of Studio Forty Seven where he combines digital fabrication methodologies and traditional metalworking techniques to create jewelry and other sterling silver products.
Herr Urbanek hat vier abgeschlossene Berufsausbildungen:
Produktionstechniker, Roboterprogrammierer, Schweißfachmann, Mediengestalter. Er kam über CAD (Produktionstechnik; Roboterprogrammierung) zum 3D-Design
Urgründer der 3D-Akademie. Durch die ständige Weiterentwicklung im 3D-Bereich hat er das Angebot der 3D-Akademie durch Erstellung von Lehrplänen ständig erweitert.
Kürzlich wurde er von der Industrie- und Handelskammer beauftragt, Aufgaben im 3D-Bereich von Berufsprüfungen zu erstellen.
Sowie vom Bundesinstitut für Berufsbildung (bibb), einen 3D-Beruf einzuführen.
Kat started her career studying sculpture and fine arts, but eventually found her medium in digital fabrication. She has a diverse tool background, with experience in both traditional and additive manufacturing. As an educator and consultant, she's helped many early stage product designers bring their ideas to life through iterative designing and prototyping. Kat's process is as focused on usability for the user, as it is for the designer, following the guiding principles of design feasibility during the entire product development life cycle.
Juan holds a Masters of Industrial Design (MID) from the Rhode Island School of Design (RISD) and a Bachelors of Industrial design (BID) from Universidad Rafael Landivar, in Guatemala City. He was raised in a colorful and vivid culture, quickly developing an interest in how things were made, tearing everything he owned apart and putting it back together, often with a few leftover pieces. After a succession of projects related to design for development, Juan was chosen as a Fulbright fellow for the class of 2013 by the U.S. Department of State. He went on to be the lead designer for Voxel8, helping create the world’s first 3D Electronics printer. He is currently Chair of the Product Design BFA at MICA in Baltimore, MA. Juan was honored as one of MIT Technology Review’s Innovators Under 35 for 2017.
Manfred is an early bird in the AM industry. He founded his first company 32 years ago. Since then, he founded a couple more startups (3D-scanning, 3D-printing, content production). During the last years he was responsible for the DACH market for Hubs (formerly 3D-Hubs). In 2021 he took over the role as Head of AM and digitalization for an automotive prototyping company. His task: make the company ready for the future and integrate all new technologies to the daily busines. He is a member of the advisory board for the German 3D printing association. Manfred is a networker, a maker and a barista. He is always open for a good cup of coffee and a good talk.
Dr. Mayra Vasques is researcher at Univ. of Sao Paulo (Brazil) and founder of iNNOV3D an EdTech company focused on supporting and training teachers and universities for the innovative and efficient use of 3D Technologies in Dentistry. She started in the additive manufacturing field in 2015, during her PhD Fellow at School of Dentistry at the University of Sao Paulo, where she led a project in additive manufacturing for the development of occlusal splints for patients with orofacial pain. Since then, she has published scientific papers and she has been involved in several AM research projects and as panelist in conferences. She is deeply involved in creating a positive and accessible local ecosystem in Brazil for digital technology and AM, working for to build the local community as Latin America Chair at ”Women in 3D Printing” company and Community Manager at “3DHeals”.
El Dr. Marcelo Pérez es odontologo y se especializó en Cirugía guiada, paciente virtual, planificaciones 3D, rehabilitación digital. Odontología digital. Impresion 3D y sistemas Cad Cam. Tiene más de 15 años de experiencia en el sector digital y tiene varias publicaciones científicas sobre el tema. Es director del posgrado de odontología digital de la Universidad Catolica de Cordoba y dicta capacitaciones y conferencias nacionales e internacionales. En su centro de capacitación y formación equipado con la última tecnología además realiza atención privada y recibe colegas de varias nacionalidades para tomar sus capacitaciones en odontología digital.
DR. SOMPOP BENCHARIT is Associate Professor, Founding Director of Digital Dentistry Technologies, and Director of Clinical Research at the Philips Institute for Oral Health Research, School of Dentistry and the Department of Biomedical Engineering, College of Engineering at Virginia Commonwealth University. He received his DDS and Diploma in Prosthodontics from Chulalongkorn University, Bangkok, Thailand, a Certificate and Master Degree in Prosthodontics, PhD in Oral Biology, and a Certificate of Clinical Research from University of North Carolina at Chapel Hill. He is a Diplomate of the American Board of Prosthodontics and a Fellow of the American College of Prosthodontists, Pierre Fauchard Academy, and International College of Dentists. He currently serves as an Assistant Editor for Journal of Prosthodontics, an Academic Editor for PLoS ONE, a Scientific Editorial Board for Scientific Reports, and an Editorial Contributor for ADA/Elsevier PracticeUpdate Clinical Dentistry. Dr. Bencharit was a recipient of the American College of Prosthodontists 2021 Distinguished Researcher Award. He has published over 100 abstracts and authored over 80 peer-reviewed articles.
Edoardo Trombini, 26 years old, is a Product Designer at Bertone Design and New Crazy Colors. Graduated in Product Design at IED University of Milan, he has a strong passion for design and planning, driven by the desire to know the past, reinterpret it and project it into the future. His initial love for "do-it-yourself" turned into the desire to create objects from design to realization. For Edoardo, there is nothing more exciting than seeing your product in its evolution, from the first sketches to its evolvement in the tiniest details. Edoardo uses 3D printing actively since 2018, which allows him, even in the design phase, to think and then create increasingly complex products from the beginning. Being responsible for prototyping and 3d printing of the group, Trombini retains that the 3D printers of Formlabs have better-printed products for prototyping and now real production.
Fraunhofer Research Institution for Individualized and Cell-centered Medical Engineering
Matthias Gräser received his Dr.-Ing. in May 2016 at the institute of medical engineering (IMT) at the university of Lübeck and was working as a group leader for hardware development at the institute for biomedical imaging (IBI) at the university clinics in Hamburg-Eppendorf, Germany. In June 2021 he received accepted the call of the University of Lübeck as Professor for Instrumentation in Imaging and develops as joint professor with the Fraunhofer Research Insitution for Individualized and Cell-based Medcial Engineering concepts for Magnetic-Particle-Imaging (MPI) devices.
Veteran, Paramedic, & Firefighter, Mychael Overstreet's desire to save lives led him to establish TensionSquare,LLC, whose namesake device eliminates the 3rd leading cause of preventable death in combat/trauma emergencies. With multiple devices in the pipeline, his company focuses on making life saving medical devices and interventions more accessible, affordable, and produced in a more environmentally friendly manner than the traditional alternatives to additive manufacturing.
She graduated from high school in 2002. In 2004, she opened his own workshop. Since 2010, she has received training related to occlusion and completed trainer training. She gives occlusion trainings in Turkey and internationally on Slavicek and NAT concepts. Currently, she continues her work in her workshop, which is also an International Training Center, which she founded in Fethiye.
Dr. Franca von Dörnberg, Fachzahnärztin für Kieferorthopädie gründete im Jahr 2016 am Marienplatz 18 in München eine der ersten volldigitalisierten kieferorthopädischen Praxen in Deutschland. Als Pionierin auf dem Gebiet des vollständigen digitalen Workflows und der dazugehörigen Arbeitsprozesse, teilt sie ihr umfangreiches Fachwissen regelmäßig mit anderen Kieferorthopäden in In-Office Kursen. Auf dem Gebiet des 3D-Drucks arbeitet sie bereits seit Anbeginn mit Formlabs Inc. zusammen und ist in der Testung von neuen Resin-Materialien engagiert. Damit trägt sie dazu bei, dass die digitale Herstellung von Modellen, durchsichtigen Alignern und weiterer Behandlungsmittel und Produkte in immer mehr kieferorthopädischen Praxen Anwendung findet und die Arbeitsprozesse so vereinfacht und verbessert werden können. Ihre Fachzahnarztausbildung für Kieferorthopädie absolvierte Dr. Franca von Dörnberg an der Medizinischen Hochschule Hannover (MHH) unter der Schirmherrschaft der European Orthodontic Society (EOS). Forschungsaufenthalte an der Harvard School of Dental Medicine, Boston, Massachusetts im Bereich der Parodontologie, sowie die Tätigkeit in der Klinik für zahnärztlichen Prothetik und Biomedizinische Werkstoffkunde an der Medizinischen Hochschule Hannover, erweitern ihren Kompetenzbereich.
Studio Dentistico Associato Cacioppo & Univ. Catania
Dr. Cacioppo Antonino had his degree in Dentistry in University of Palermo (2006). Master course in Implantology (2007). PhD in Oral Sciences (2008-2011). Post-doc in University of Palermo (2009-2013). Advanced training course in Guided Implantology in University of Genova (2011). Professor in advanced course in implantology, University of Brescia (2011). Professor of Guided Implantology in Master II level “Complex oral rehabilitations”, University of Catania. Visiting Professor of Prosthodontics in University of Catania since 2017. He has his private practice in Palermo since 2006. He immediately started using intraoral scanners and CBCT. He started with "in office" 3D printing in 2015.
Dr. Antonino Cacioppo, DDS
Private Practicioner & Visiting Professor
Studio Dentistico Associato Cacioppo & Univ. Catania
Patricia has been a part of Alvetro Orthodontics since 2019. Patricia started out as a Clinical Assistant and has now become the Digital Specialist at Alvetro Orthodontics. Patricia has experience in 3D printing and has been able to experiment with a variety of 3D printers and 3D printing materials. Patricia oversees the digital workflow, designs and prints indirect bonding trays, aligner case series, and models for appliances for the patients of Alvetro Orthodontics.
Dr. Lisa Alvetro is considered an early adopter of 3D printing in orthodontics with years of experience. After 28 years of practice, she considers the integration of a digital workflow and 3D printing into her practice as the most significant advancement in orthodontic treatment and the entire patient experience. Not only is Dr Alvetro in private practice, she shares her digital experience as an evaluator and consultant for various companies. As a faculty member at Case Western Reserve University department of Orthodontics, she shares her passion for 3D printing with the resident and has establish their 3D print lab. Her belief that every office should be 3D printing or they will be missing out on something special leads to her enthusiasm in sharing her experience.
Daniel graduated with a BSc Hons in Biomedical Engineering and an MSc in Medical Visualisation and Human Anatomy. He has over 10 years experience in medical device development and deployment into clinical settings, 7 of which are specifically related to medical 3D printing and automated applications. Daniel is responsible for the strategy within Axial3D, including its development of machine learning algorithms to automate segmentation processes.
Previously studied fashion communication, styling, fashion editing and photography. Founded an online fashion magazine called Kaos Magazine when she was 21 with a team of 12 people. In 2016/2017 she moved to London for a year and worked on Carnaby Street at a shoe company called Irregular Choice. When she came back to Italy she worked in a department store in Rome, again in the shoe section and started studying innovation, startups at the same time. She also studied fashion sustainability at Copenhagen Business School. Trilly shoes is her obsession because she knew that it can positively change the quality of women's lives.
Dr. Christian Petropolis studied medicine at Dalhousie University and completed residency in Plastic and Reconstructive Surgery at the University of Manitoba. He completed a fellowship in Adult Craniomaxillofacial at Sunnybrook Health Science Centre before returning to Manitoba to practice. His clinical interests are trauma reconstruction, cutaneous oncology and head and neck reconstruction. Dr. Petropolis is the program director for the plastic surgery residency program and has a strong interest in medical education and surgical simulation. His other research interests include medical modelling, 3D printing and rapid prototyping.
Dr Kanawati is an Orthopaedic Spine Surgeon who has developed a special interest in clinical and research uses of 3D printing. He has developed several novel custom 3D printed patient-specific spinal guides to assist in surgery, and uses composite models made of several different Formlabs materials to plan complex surgeries.
Bill graduated from Cambridge University Vet School in 1997 and subsequently worked as a vet in general practice before undertaking specialist training in Orthopaedics. Bill then worked as a referral orthopaedic surgeon for nearly 10 years, during which time he started using CAD-based virtual surgical planning and 3D-printed surgical guides in the treatment of cases. Bill’s company Vet3D has now provided over 1000 patient-specific 3D-printed surgical guide systems for surgeons around the world for treatment of limb deformities, joint fusions, and spinal instability syndromes.
Tufts University Cumming School or Veterinary Medicine
Dr. William “Mike” Karlin is a member of the Department of Clinical Sciences and is an Assistant Professor in Small Animal Orthopedic Surgery. Dr. Karlin splits his time between the orthopedic service in Foster Hospital for Small Animals and instructing clinical year students and training interns and residents. Dr. Karlin came to Tufts from his position as a small animal surgeon at the Intown Veterinary Group Hospital in Natick, MA. Prior to that he was a surgeon at the Southern New Hampshire Veterinary Referral Hospital in Manchester, NH. Dr. Karlin is double-boarded as a diplomate of American College of Veterinary Surgeons (ACVS) in both Small Animal and Large Animal. He completed a residency/fellowship for dual certification in small animal surgery at Lauderdale Veterinary Specialists in Fort Lauderdale, FL in 2014, and he received his Masters of Veterinary Science and completed a residency in large animal surgery from the University of Illinois in 2010. His DVM degree was awarded from Kansas State University, College of Veterinary Medicine in 2006, and his BS from the University of Nebraska in 2002.
William Mike Karlin
Tufts University Cumming School or Veterinary Medicine
Niro is the Business Development Manager at Medairum Pte Ltd which provides 3D printing services for the medical and dental fields in Singapore, working closely with doctors and hospitals to provide easy access to 3D printing and help them utilize the benefits of custom/patient-specific treatments. Niro holds a Bachelor's Degree in Bioengineering from the National University of Singapore and a Master's Degree in Smart Product Design/Additive Manufacturing from Nanyang Technological University, Singapore.
Arjen Sundman is one of the founders of Amfit, a pioneer in mass customization. He has served the organization as mechanical engineer, engineering manager and since 1999 as President. He holds 13 patents for technology related to the company's core business of digitizing the shape of a foot, using Amfit's suite of software tools to adjust that shape and Amfit's proprietary milling technology to manufacture custom foot orthotics in minutes. Mr. Sundman has been on the forefront of mass-customization technologies for most of his professional career and embraces the 3D printing revolution embodied in products like those provided by Form Labs.
Felix has shaped the manufacturing and design process of composite parts within FaSTTUBe. Together with Formlabs, he developed an affordable and time efficient process for creating complexly shaped, light weight parts for various purposes.
Dr. Ravi applies his expertise in 3D printing technologies and medical image segmentation for creating patient-specific 3D anatomic representations for planning complex surgeries at the University of Cincinnati College of Medicine. Dr. Ravi’s recent model for a cardiac surgery resulted in the first endoscopic triple valve surgery in the US. Dr. Ravi brings a unique blend of academic and industry experience to the burgeoning medical 3D printing enterprise. His study on the accuracy of 3D printed anatomical models was Editor’s Choice for June 2021 in the journal Medical Physics. This work was also covered by the leading 3D Printing Industry Newsletter. Dr. Ravi serves as Guest Editor for a thematic series on the medical applications of desktop vat photopolymerization 3D printing in the Springer journal 3D Printing in Medicine. He is among a handful of junior scientists elected to attend the 2021 Introduction to Academic Radiology for Scientists program at RSNA.
Kerim Genc is the Business Development Manager for the Simpleware Product Group at Synopsys. He joined Simpleware in 2011 and is currently responsible for managing global sales, business development, partnerships and technical marketing content development, with a significant focus on image-based patient specific workflows for 3D Printing and surgical guides/planning. He received his BS and MS in biomechanics from the University of Calgary and the Pennsylvania State University respectively, and completed his PhD in Biomedical Engineering at Case Western Reserve University, examining countermeasures to and computational models of spaceflight induced bone loss and fracture risk.
Kim has taught Mechanical Design and Tool Design for Moraine Park Technical College in West Bend, WI for the past 25 years. Previously he designed zinc die cast dies for an automotive lock manufacturer in Milwaukee for over 15 years. In addition, he has been using additive manufacturing methods for 30+ years to print parts for production and educational needs. The past 4 years he has been teaching students how to printing cores and cavities to run in a 90 ton injection molding press. He is also the Kettle Moraine SolidWorks User Group Leader (KEMSUG).
Konrad Job is a Podiatrist and Project Manager at PodCAM Supplies. Konrad has spent the past 10 years working in the foot orthotic manufacturing sector. He has overseen the development of a foot orthotic CADCAM system (LaserCAM Orthotics) that generates files for subtractive, and more recently additive manufacture. His Podiatry degree also helps him perform his current role as a clinical consultant for Cad Cam Orthotics, where he routinely assists health care professionals with 3D scanning, foot orthosis prescription and understanding the equipment required for orthosis design and manufacture.
Francisco is the founder and CEO at Prothesia. A health-tech startup focused on mobility and diagnostics. He is a Mechatronics Engineer and has a minor in Advanced Materials. He previously worked as a cybersecurity consultant and Open Data officer in the Mexican state of Jalisco. He has been recognized as an MIT Innovator Under 35.
Alex Drew is a biomedical engineer working in the orthopaedic medical device field. He graduated from the University of Portland (’08) with a degree in mechanical engineering and worked as a manufacturing engineer focused on land-based and aero turbine investment casting. Alex earned his doctorate from the University of Utah (’18) where he worked to develop implant systems for direct skeletal attachment of prosthetics in lower and upper extremity amputees. He chose to follow this technology to DJO Surgical in Austin, Texas as they aim to make the approach broadly available to amputees who are not well served by traditional socket style prostheses. While at DJO, Alex has led the integration of rapid prototyping and additive manufacturing techniques in the new product development process. The enabling Formlabs platforms have ensured that the technology is embraced across the organization; yielding more iterations, in less time, and at lower cost.
Michael is a well-known expert in the field of digital dentistry. He has a unique insight because he is a dentist and a dental technician with a Ph.D. in the field of digital dentistry. Michael has been fully digital since 2011and he is both technician and a dentist on all of his prosthodontic treatments at his private practice in Malmo Sweden.
Tom Rish is the Manager of the Medical Device Gurus at Greenlight Guru who work with customers to utilize their QMS software to build safer products on expedited timelines. Tom is a Biomedical Engineer who began his career developing implant and instrument systems in the orthopedic industry. He enjoys helping customers successfully navigate regulations across the globe as they bring life changing technologies to market.
Hisham Sabbagh studied dentistry at the Friedrich-Alexander University of Erlangen-Nuremberg and at the Faculty of Medicine and Health Sciences of the University of Barcelona. He practiced dentistry in South America and at the Charité university hospital before specializing in orthodontics and dentofacial orthopedics. Since 2016, he has been involved in digital dentistry in research, clinical and teaching settings and obtained his PhD degree in the field of 3D printing. He currently works as a research associate, lecturer and orthodontic specialist at the Ludwig-Maximilians-University Munich.
Lorena is passionate about innovation and entrepreneurship, she believes in using technology for good and collaboration to make a better world for everyone. From being a lawyer working in foreign affairs and diplomacy to becoming cofounder and advocate of innovation and entrepreneurship in LATAM. "Is an honor to be part of an incredible company and team, at Prothesia we want to assure access to better quality life through massive innovative diagnostics and medical devices."
Callum is a Sports Engineer with the Australian Institute of Sport (AIS). Callum graduated in mechanical and manufacturing engineering from the Australian National University in 2012. Callum’s role within the AIS is to provide unique and customized equipment solutions for elite athletes to help them realize their full potential. The range of sports he services is broad, so the manufacturing technologies he employs needs to be as versatile as possible. Callum enjoys thinking creatively and employing various manufacturing technologies to provide high performance and effective solutions for Australian athletes.
Assistant Professor, Otolaryngology Head & Neck Surgery; Affiliate Professor Biomedical Engineering
University of Michigan
David Zopf is an Assistant Professor in Otolaryngology - Head and Neck Surgery at the University of Michigan. He is also a part of the Scaffold Tissue Engineering Group in the Department of Biomedical Engineering. Beginning in 2011, Dr. Zopf has cultivated several innovations in medical 3D printing. Dr. Zopf is a member of the biomedical team - along with Dr. Glenn Green and Dr. Scott Hollister - that developed a lifesaving, patient specific, 3D printed airway splint. Dr. Zopf was lead author of the landmark New England Journal of Medicine article detailing this innovation. This was the first report in literature introducing the role and potential of 3D printing in personalized medical devices. Dr. Zopf led preclinical testing in a novel animal model for tracheobronchomalacia. This work has paved the way for an upcoming clinical trial. Dr. Zopf then led the development of 3D printing for craniofacial applications including scaffolds for auricular reconstruction and microtia repair, as well as nasal scaffolds for partial and total nasal reconstruction. With unique national and international exposures to microtia reconstruction, Dr. Zopf then led the development of a 3D printed rib for surgical simulation of auricular reconstruction. He has utilized 3D printing for several other applications in surgical simulation, including simulation and rehearsal in skull base surgery. Dr. Zopf continues to find further applications for the versatile tool of 3D.
Assistant Professor, Otolaryngology Head & Neck Surgery; Affiliate Professor Biomedical Engineering
Kelsey is a founder of southern ocean subsea, he has been working in the ROV (remotely operated vehicle) industry for 7 years operating, consulting, repairing and inventing. His background before this was a diesel tech working with mechanical and electronic systems, his interest in design, innovation and robotics led him to the ROV industry where he never looked back. We now have a growing and continually innovating company that wants to push the limits of additive manufacturing in the subsea.
Dávid Lakatos is Chief Product Officer at Formlabs, overseeing all aspects of the company’s product development. Prior to joining Formlabs, Lakatos founded Sold., an automated peer-to- peer selling service that was acquired by Dropbox. He was a co-founder of FabLab Budapest, the first rapid prototyping lab in Central and Eastern Europe. A native of Hungary, Lakatos holds degrees in electrical engineering with a focus on nanosciences from the Budapest University of Technology and Economics, as well as a M.S. in Media Arts and Sciences from MIT.
Jeff leads the Formlabs global marketing team, responsible for all aspects of revenue, brand, and community marketing. Jeff brings to Formlabs more than two decades of enterprise marketing experience at technology pioneers and leaders including Endeca, Qlik, and Business Objects. Jeff’s experience spans all stages of growth - from seed funding through initial public offering and acquisitions. Jeff holds a B.A. in Computer Science from Tufts University and an MBA from Boston University Questrom School of Business.
James Austin is the Lead Mechanical Engineer at PSYONIC, a prosthetic start-up in Champaign, Illinois that develops and manufactures advanced, accessible, robust bionic limbs. James received his MS in Mechanical Engineering in 2018 from the University of Alberta after completing his thesis research in prosthetic control at the BLINC Lab. Prior to this, he received his BE in Honors Mechanical Engineering in 2013 from McGill University, and worked on satellite hardware design at MDA Satellites from 2014-2016. At PSYONIC, James works on and oversees the design, CAD modelling and manufacturing of all mechanical components - especially for PSYONIC's flagship prosthetic product, the Ability Hand - as well as implementing, conducting, and analyzing mechanical tests and quality controls.
Dr. Goldstein's research focuses on utilizing 3D technologies both in the clinic and in the laboratory. Dr. Goldstein's Lab focuses on anatomical models, patient specific treatments, and tissue engineering. Most recently his team has developed and deployed multiple devices for COVID-19 pandemic response. Additionally, he has developed amphibious prosthetic legs for both civilians and wounded warriors.
Associate Professor Einar Heiberg has a background in computer science and electrical engineering with a PhD in Medical Image Processing from Linköping University, Sweden. He is an active researcher with more than 100+ publications on medical image process, and 2007 he started the MedTech company Medviso AB as a spin-off of the from research at Lund University. In 2019 he initiated the 3D Centre at Skåne University Hospital of which he is a director. The centre serves the hospital and surrounding hospitals with patient-specific models and cutting guides.
Greg has a BS degree in Mechanical Engineering with a Biomedical Engineering Option from the University of Colorado Boulder. He is the Director of R&D at BioMedtrix, a Movora company, which is a veterinary orthopedic company specializing in joint replacements. They use 3D printing in many different facets of their work, from prototyping implants and instrument designs for a cadaveric research surgery to Patient-Specific Instruments (PSIs) utilized in custom clinical cases.
Samuel is passionate about interventional neuroradiology. Looking to the future, he wants to develop his daily practice and profession, which is why he is involved in clinical research and the development of new models of care around stroke. Samuel likes to communicate; pass on his knowledge and his experience.
"Based in Mexico City, Martín Carcaño has spent the past 15 years in a few technology companies: working on disruptive workflows for Advance Design and Manufacturing processes. From Automotive Industries like FORD and VW to High Tech companies like Autodesk and FARO Technologies. Today as Sr. Product Manager for Advance Medical Devices, he spends most of the time working on developing custom solutions to unique design & engineering challenges. Focusing in helping patients recover life quality with multiple technologies, materials, and manufacturing process embracing GRANTA’s company vision “Changing People’s life” by developing custom made prosthetics, body implants, medical devices, and high-performance body parts."
The Belfield Clinic / Dublin Dental University Hospital
"Dr Boyd completed his undergraduate dental degree in 2012, following this he completed his doctorate of clinical dentistry in prosthodontics in Dublin Dental University in 2017 (Trinity College Dublin). During this time Dr Boyd completed an externship at the Jerry Weintraub Centre for Reconstructive Biotechnology (UCLA Prosthodontics Department), which was his first introduction to digital dentistry. Following completion of his specialist training in prosthodontics Dr Boyd had the privilege of taking over a longstanding prosthodontic practice and also completed his fellowship examinations to the Royal College of Surgeons Ireland. In 2019 Dr Boyd became the President of the Irish Dental Association Metropolitan branch and currently sits on the Irish Dental Association committee. Dr Boyd has presented at both international and domestic conferences, and is committed to routinely providing further training for the profession."
Quincy Vadan is the artist owner of Vadan LLC, a luxury product design and services company in Los Angeles. Vadan LLC produces architecturally unique fine jewelry for the evolved frontiersman under its own brands, provides jewelry, clothing accessories, and collectible product design services for Amiri and other leading fashion brands and celebrities, and advises jewelry professionals on speeding up production with 3D technology. Quincy was trained as a classical visual artist under masters like Henry Yan and Kazu Sano, then taught himself 3D design using Zbrush software to bring classical techniques into the modern production era.
The New Materials / MIT Climate and Sustainability Consortium
Paloma obtained her Ph.D. in MIT Design and Computation in 2021, developing pedestrian simulations by applying state-of-the-art AI. In parallel, her motivation led her to work in sustainable materials and reducing negative environmental impact. Paloma’s work currently aims to foster bio-based materials for fully circular economies; revolving around material development, computing, and manufacturing. She has experience working with forestry companies and construction materials. A few of Dr. Gonzalez-Rojas achievements are: Creating an organic compostable film from recycled wood pulp, a matrix material for packaging at all scales. In addition, with her co-founder Jose Tomas Dominguez, MechE, they invented tooling for molded fiber technology through her startup, The New Materials. Such tooling was developed implementing Formlabs technologies and serves to build up manufacturing resilience around the globe.
Self-taught, passionate about engineering, Cyrille had the chance to make his professional career in research and development in mechatronics thus combining all the subjects that fascinate him and which allowed him to accumulate the knowledge necessary for the development of the SKOP, the first connected 3D printed stethoscope dedicated to teleconsultation.
Florian De Boeck is the co-founder of Spentys, a 3D modeling and printing platform enabling healthcare providers to create patient-specific medical devices cheaper and faster. Florian is a serial entrepreneur who has always felt the urge to build and create. After graduating with a master’s degree in biomedical engineering from Politecnico di Milano (and rejecting one from Stanford Unversity), Florian set out to apply 3D printing technology to orthopedics. His mission is to bridge the gap between the complexity of 3D technologies and the reality of the medical environnement. Today, Spentys has around 20 employees, have raised VC money, and are quickly making their solution available across European medical centers.
Will Hilgenberg has been working with Formlabs printers since 2014 to develop new ways of utilizing 3D printing techniques in a traditional manufacturing workflow. He founded Albatross Bikes to push these ideas of combining 3D printing into a highly customized product workflow to deliver the highest performing and unique products to his customers.
Niklas is the technical manager of the FT20c, the latest combustion race car of FaSTTUBe, the Formula Student Team of the TU Berlin. Here he first encountered Formlabs as a sponsor of the student team and was responsible for the cooperation and the use of 3D SLA printing within the project. He just completed his bachelor’s degree in Transport Systems and now focusses on his master’s program Automotive Systems.
"Henry Pinchbeck is a Founder and the CEO of 3D LifePrints. A scientist by training, he is an experienced businessman and a UK qualified solicitor. As CEO, Henry is responsible for all 3D LifePrints’ global activities but particularly concentrates on the development of the medical 3D printing market in the UK and USA. 3D LifePrints is one of the leading medical 3D printing companies in the UK. Its focus is the design and manufacture of patient-specific medical devices. 3D LifePrints’ USP is that it provides these services at the Point of Care, from embedded facilities within host hospitals. The Point of Care service provides hospitals with hardware, software and staffing - allowing clinicians direct access the full range of 3D technologies."
"Mauro Del Santo (*1978) is a designer and educator specialising in Product Design, innovation in Material Technology and Teaching. Since he set up his own practice in Rome in 2003, he has developed furniture, products, lighting, and exhibitions for some of the leading companies in the design field. Since 2017, he has been working full-time at IED Rome as a lecturer and head of the Design Lab. Amongst his most prominent clients are IED, Mitsubishi Chemical Corporation, Municipality of Rome, Italian Ministry of Defence, Israeli Ministry of Foreign Affairs, Selex, Sistema Compositi, UNHCR, Danish Refugee Councils, ENI, Hertz. His designs have received international design awards such as the nomination for the Compasso d`Oro, Eccellenze del Design nel Lazio, Food Design 3 and the Maker of Merit 2014, 2015 and 2016."
NEO3D is 3D printing service located in Switzerland. With next generation AM technology, they produce tailored fitted medical products with various hospitals around the country. They also offer a high quality printing service with the Fuse 1.
Sagar has an interdisciplinary experience of 8+ years in the medical & manufacturing industry with hands-on exposure to CNC machining, vacuum casting, and all seven Additive manufacturing techniques. He has earned a Bachelor of Engineering degree in Biomedical Engineering from the University of Mumbai and successfully worked with the best doctors across India for more than 500 patient-specific projects.
"Michael Konosky is the Co-founder and Head of Design and Manufacturing at PLAATO Technologies, a scale-up located in Oslo, Norway, designing and making products for home and professional craft brewers around the world. After having founded PLAATO in 2017, Michael led the company through two crowdfunding campaigns as well as earned three Red Dot Design Awards for outstanding Industrial Design and Smart Products. PLAATO now has over 30.000 users globally and continues to grow in the craft brewing industry. After graduating from HIT, Michael worked as a product designer and project manager and designed for over 50 products before founding PLAATO. Already during university, Michael gained his first experience in 3D printing, leading the team of the prototyping lab in his university. Since then he has worked on multiple projects, designing products for low to medium scale production using 3D printing."
Matthias Krabel successfully graduated as a mechanical engineering technician. In the past 18 years he gained diverse experience as a project manager and engineer in the areas of plastic thermoforming, plastic injection molding, metal construction and foam technology. Before founding the product design and development start-up MAKRA PRO, Matthias Krabel used his knowledge in the field of additive manufacturing as COO of a saddlery to make conventional tooling technologies more flexible, faster and cheaper. He constructed and developed a hybrid 3D-printed tool, and this was the basis for founding his company in 2017. His efforts have been supported by the Bavarian government with funding for innovative products. In the summer of 2020, a patent was filed for this process. As director and owner of the company MAKRA PRO this KNOW-HOW enabled Matthias to find continuously SMART solutions. Through his research on Formlabs materials, he permanently succeeds in opening new areas of application. www.makra-pro.de
With over 8 years of experience in the O&P market, Benoit's goal is to educate people on digital methods and the importance of the post-scanning treatment process. Over the years, Benoit had the chance to discuss with multiple professionals in the market, allowing him to truly understand the needs and problems of your reality
Dr. Tom Shannon is a board-certified orthodontist and graduate of the University of Michigan (DDS), the University of North Carolina (AEGD), as well the University of Tennessee (MDS, Orthodontics). As a leader in orthodontic simulation design, Dr. Shannon has been at the forefront of in-office aligner production, 3D printed fixed appliances and hybrid treatment options. Currently, in private practice in Southwest Michigan, Dr. Shannon is also a co-founder of Braces On Demand and holds multiple patents in the 3D printing space.
Director of Regulatory Affairs and Quality Assurance
"Sam serves as the Director of Regulatory Affairs and Quality Assurance for Formlabs. Sam started at Formlabs in April of 2019 where and is responsible for leading Regulatory Affairs and Quality Assurance to ensure compliance for innovative 3D printing medical products. He has implemented an ISO 13485 certified quality management system and successfully launched and maintained regulatory compliance for multiple medical devices across a number of global markets. Prior to that, he held a regulatory affairs position at Fresenius Medical Care and was in the US Food and Drug Administration (FDA). While in the Office of Regulatory Affairs at the FDA, Sam investigated and inspected medical device manufacturers in the United States and abroad, ensuring compliance with the Food Drug and Cosmetic Act. He is Regulatory Affairs Certified (RAC-US) by the Regulatory Affairs Professional Society (RAPS). Sam earned his Master’s Degree in Biology from the University of Nebraska and his Bachelor’s Degree in Zoology from North Carolina State University."
Director of Regulatory Affairs and Quality Assurance
"Roland Lim works as a Biomedical Design Technologist in the National University Centre for Oral Health, Singapore (NUCOHS). Working closely with surgeons and utilizing 3D Virtual Surgical Planning, he designs surgical guides, splints & cutting guides for Oral-Maxillofacial Surgery and other surgeries including: Surgical splints for Orthognathic surgery, Intraoral Vertical Ramus Osteotomy, Mandibular Tumour Resection, Mandibular Angle Reduction, Tooth Autotransplantation, bone graft template body and anatomical models for surgical planning. "
Stéphane Rodrigues is the Project Manager of the additive manufacturing platform of Polyvia, a French organization of the plastics industry. The "Industrial Performance" technical pole has conducted numerous tests on 3D printed polymer molds and has become a reference for many plastics manufacturers.
Julian is the Founder and Managing Director of Sinterex. In 2017 Julian bought his first 3D printer and started producing metal 3D printed products for the Dental industry. Since then he has added more printers, software, and people, and today Sinterex is a team of 15 people including Doctors, Bio-medical engineers, Mechanical engineers, and Dental technicians, who work together to serve customers in the Dental, Medical, and Oil & Gas industries.
Studied in rehabilitation of historical monuments at shiraz university in Iran and architecture at Ecole Nationale Supérieure d'Architecture de Saint Etienne. Ehsan is a 32 years old BIM Manager for Urbanmakers Architectes in France.
"Dr. Alexis Dang, MD is a board certified Orthopaedic Surgeon at UCSF. His clinical and research practice is at the San Francisco VA Health Care System. He is an Assistant Professor at UCSF, co-founder of Edge Labs in the Department of Orthopaedic Surgery at UCSF, co-founder and Chief Medical Officer at PrinterPrezz, co-founder of the SFVA TRST (Translational Radiology and Surgical Technologies) 3D program, and staff member at the UCSF Makers Lab. His use of 3D printing spans from the routine use of precisions anatomic models for surgical education, training, and preparation to developing next generation implantable devices with 3D printed Titanium."
Christophe Nord investigates on new process solution to give recommendation to the industrial department with the aim to increase the add value of the ARaymond product and be more flexible and reactive
When I was young I liked to walk around in the buff with a tool belt as a loincloth; blow-molded hammer in hand. This progressed into sandbox construction yards. I then graduated to LEGO bricks. The urge to design has never left. I now lead design teams to execute and deliver on award-winning products. I provide strategic vision and guidance on the projects I lead in the medtech/healthtech and consumer tech space. I'm deftly able to consider relevant stakeholders and propose design solutions that meet their collective needs. My in-depth knowledge of the product development process: from upfront research and requirement definition, consideration of the complete user experience, to concept definition, through to prototype engineering and design for manufacturing and assembly allows me and my teams to deliver exceptional project outcomes.
George is an Electrical Engineer with a specialization in Telecommunications and Computing management. During the past 16 years, George has moved from Telecom into the Dental field specializing in the manufacturing of prostheses and clinical appliances. His first contact with 3D printing occurred in 2007 when creating a guided surgery solution. Since the first contact adaptive manufacturing, George has been using 3D printing daily to manufacture models, surgical guides, prostheses, and the prototyping of R&D products.
Genevieve is a manufacturing engineer working with additive technologies at Fast Radius. With a background in welding metallurgy and metal additive manufacturing, she previously worked on 3D printing titanium, nickel-base, refractory metal alloys for defense, aerospace and marine/Naval industries. At Fast Radius, she's got her hands on printed parts every day, working with Formlabs SLA, Carbon DLS, and HP MJF processes. Genevieve loves to learn about new supporting and orientation techniques, and she distills these insights to her customers to design better parts smarter, to make new things possible. Understanding how parts are redesigned for different printing processes and traditional manufacturing processes allows her to leverage technologies across supply chains to give customers the parts they need when they need it.
Bryan Bartley is a biomedical engineer with a background in diabetes, kidney disease, and cancer research. He currently works as a computational biologist and data scientist for Raytheon BBN based in Cambridge, MA. He received a PhD in Bioengineering from the University of Washington and has been working remotely from San Juan Island in the Salish Sea.
Sam is the founder of SGD 3D, an on-demand digital manufacturing service based in the United Kingdom. Specialising in high-performance 3D printing applications and low-volume production they offer FDM, SLA and SLS additive manufacturing services for a variety of industries including; Aerospace, Automotive, Rail.